Precision metal stamping tool and die projects by Vortool Manufacturing
A metal stamping die is a custom precision tool that cuts, pierces or forms sheet metal into a profile or shape. The die's cutting and forming sections typically are made from tool steel.
Custom metal stamping dies are commonly used in hydraulic, mechanical, pneumatic, and air over oil punch presses to produce the metal stamped components in large volumes. Generally, custom metal stamping dies or metal stamping tooling are categorized by the types of operation performed using the tool, such as blanking, piercing, bending, forming, forging, trimming, etc
See our in-house precision metal stamping die display below that was designed and built by Vortool Manufacturing. Made in Canada.
Call sales at: 604-239-7218 or send us an EMAIL with the outline of your die tooling project.
Edge bending die
Forming tool and die for laser cut parts.
Perforating tool and die.
Metal stamping die for punching hole and cutting off corner of already flattened pipe. Interchangeable insert for different size of pipe.
Aluminum extrusion rectangle hole punch tooling
Multi set up sheet metal stamping die for punching holes
Custom multi tip punch plastic lid stamping tool and die
Double D hole punching metal stamping tooling
Custom portable long aluminum tube / pipe punching long mandrel die station
Multiple hole punch progressive sheet metal stamping die. The sheet metal is fed through as a coil strip, and a different operation (such as punching, blanking, and notching) is performed at the same station of the machine with each stroke of a series of punches.
Custom compound sheet metal stamping die.Metal stamping is the process where the die separates or blanks the part from a steel strip in one stroke. A compound metal stamping die will perform multiple cuts or punches in one stroke, as compared to multiple strokes. Compound metal stamping dies are often used to stamp simpler flat parts such as washers.
Ball end wire rope crimping swage die for rope or cable crimping
Sheet metal stamping tool and die for trimming and hole punching
Custom aluminum extrusion punching tool and die. Metal stamping tool to punch oblong holes in curved aluminum extrusion,
Progressive metal stamping die. Custom precision progressive sheet metal stamping die and tool manufacturing
Custom multi-station die to flatten, bend, punch and trim steel tube / pipe.